While trying to identify my misfire with some help in another thread, I came across a great deal on the Kenwood dpx502bt which will be a nice upgrade from the factory HU. It's an LT, no Bose.
I was basically finished tonight, when I thought I better test it before I closed it all back up... when lovely... no power to the new Kenwood.
I'm using the Metra LC-GMRC-01 harness. I took my time and followed the instructions. All joints are soldered and well taped.
What am I missing here? Im not using any orange wires.. Should the yellow coming from the kenwood harness not go on the end of yellow wire, but where the wire meet at the silver junction. Or is something wrong with the red wire here? Black to Black should give me a good ground off the factory harness. This seems like it should be simple.
I was basically finished tonight, when I thought I better test it before I closed it all back up... when lovely... no power to the new Kenwood.
I'm using the Metra LC-GMRC-01 harness. I took my time and followed the instructions. All joints are soldered and well taped.
What am I missing here? Im not using any orange wires.. Should the yellow coming from the kenwood harness not go on the end of yellow wire, but where the wire meet at the silver junction. Or is something wrong with the red wire here? Black to Black should give me a good ground off the factory harness. This seems like it should be simple.