Envoy SLT rear hatch hinges

[Rob905]

I’m changing the hatch on my ‘04 Envoy.
I’m looking if anyone has any suggestions on how to get the pins out to separate the hinges or maybe have a blowup picture of the parts I need.
I understand that the pins for the left and right side are the same but then there is a clip required on each side but the clips have a left side and right side.
I need to make sure that the hatch goes together so the stop works and limits how far the gate is able to open.

 

[Mooseman]

The clips are just normal E-clips that snap in. I can't see why they'd be different side to side. Wouldn't be a bad idea to get new pins and bushings. What limits the Hatch's travel I are the gas cylinders.

 

[Rob905]

Thank you. I’m just going by what the GM parts person told me and had to order one of them from the US. Are the bushings separate or attached to one of the hinge parts?

 

[Rob905]

Does hatch glass share the hatch hinges?

 

[Mooseman]

Are the bushings separate or attached to one of the hinge parts?

I can't remember. It's been too long since I've replaced mine. Check with online microfiches or the parts Dept at the dealer.

Does hatch glass share the hatch hinges?

Yes.

 

[Rob905]

Thank you. I’ll stop by the parts dept tomorrow