Engine stall low oil now cyl 5 misfire

jeffro312

Original poster
Member
Oct 4, 2012
442
East Haven,Ct
I pulled in buddy's driveway kind of downhill and truck stalled said low oil pressure

Started truck back up and was shaking a lot

Started torque and showed a lot of current misfires on cylinder 5

Previous to this only issue was a random code p0171 I think bank one lean would come on go off for long time come on go off

Drove it home and engine light came on flashing p0300 random misfire

Checked torque and still only showed misfired on cyl 5.

Was checking other stuff in torque noticed there wasn't a reading for bank 1 sensor 2 02 sensor


Was just so random any help what to check would be great waiting for rain to stop before I can go out and switch plugs and coils to see if it follows

04 rainier 216k miles
 

Mooseman

Moderator
Dec 4, 2011
25,262
Ottawa, ON
Try swapping #5 coil with #4 and see if the problem follows. Could be a dead coil. You probably got the low oil pressure message because the engine stalled.
 

jeffro312

Original poster
Member
Oct 4, 2012
442
East Haven,Ct
So engine stalls then after start I have misfire. No misfires previous to stalling.

Rain stopped going to go switch coils see what happens thanks moose
 

jeffro312

Original poster
Member
Oct 4, 2012
442
East Haven,Ct
Well except power steering leak driver side. Threw some blue devil stop leak in keep my finger crossed don't have money to get new rack. Poor truck is getting old
 

Forum Statistics

Threads
23,273
Posts
637,498
Members
18,472
Latest member
MissCrutcher

Members Online

No members online now.