wooohoo!! first post on the new site!!
and might I add, a very clean and easy site to navigae!
here goes...
I have an 05 envoy slt with the full auto hvac and have been experiencing some issues.
The other day i shut the truck off and the fan kept going so i did the usual on and off until i ended up just pulling the fuse and going to bed. I found the post on "the other forum" about the blower resistor pack/ module so i went and picked up the module from my buddy at gm.
i installed the new module as directed and the fan stopped blowing when truck was off 'whew!' .......BUT..... now this is where its unusual, if the hvac controls are off before the truck is started and i start the truck and turn the hvac on it works fine through all settings speeds and temps, but if i shut hvac off while truck is running and try to turn it back on, it turns on but doesnt blow, same thing if the hvac controls are left on when the truck is shut off and restarted with them on.. it just doesnt blow.
I tried disconnecting the battery, pulling the hvac fuses, and even the ignition fuses but it still reverts to the same weird thing.
If its easier to understand i can video what im talking about and youtube it for anyone interested .
any info is greatly appreciated!!
and might I add, a very clean and easy site to navigae!
here goes...
I have an 05 envoy slt with the full auto hvac and have been experiencing some issues.
The other day i shut the truck off and the fan kept going so i did the usual on and off until i ended up just pulling the fuse and going to bed. I found the post on "the other forum" about the blower resistor pack/ module so i went and picked up the module from my buddy at gm.
i installed the new module as directed and the fan stopped blowing when truck was off 'whew!' .......BUT..... now this is where its unusual, if the hvac controls are off before the truck is started and i start the truck and turn the hvac on it works fine through all settings speeds and temps, but if i shut hvac off while truck is running and try to turn it back on, it turns on but doesnt blow, same thing if the hvac controls are left on when the truck is shut off and restarted with them on.. it just doesnt blow.
I tried disconnecting the battery, pulling the hvac fuses, and even the ignition fuses but it still reverts to the same weird thing.
If its easier to understand i can video what im talking about and youtube it for anyone interested .
any info is greatly appreciated!!