Search results

  1. B

    NEED HELP Brake Controller

    Yeah mine seems to have been changed from OEM not GM a gm plug looks like someone added on an adapter to have both 7 and 4 pin .The voltage was low 6 volts i think but ran outta time so went with caution and made 1500 ks no problem now to try and figure that out as well as the rear access warning
  2. B

    NEED HELP Brake Controller

    so i figured that out as i still have no trailer brakes just the stupid dot and teh power wirte under the hood is for charging the battery in the trailer so ill get my meter out and scratch my head for a bit
  3. B

    NEED HELP Brake Controller

    now all i need to do is find a nut for the terminal but thanks yes it was off just laying there
  4. B

    NEED HELP Brake Controller

    Thanks ill find out in a hour much appreciated Thanks I saw something about this red wire on a utube video and they werent sure what it did , thanks
  5. B

    NEED HELP Brake Controller

    Is that power wire at the fuse panel not attached from the factory ??? I have power to the unit will check the colors on sunday when we get back from the car show in Bothwell , thanks
  6. B

    NEED HELP Brake Controller

    Our connecter locks to the plug so im sure it sin but will test again thanks
  7. B

    NEED HELP Brake Controller

    hooking up a reese controller its very hard to read the specs on the wires from under the dash almost like they were drunk on a friday , I hooked it up the way believed was right but only got the blink light on the control when brakes applied .??Any help appreciated
  8. B

    NEED HELP Fuel leak

    ran 3/8th hi pressure fuel line and hi pressure clamps . what a bugger to do had to drop front drive shaft as far as i could to get to some less rusty line .
  9. B

    NEED HELP Fuel leak

    its on the steel line near the starter
  10. B

    NEED HELP Fuel leak

    so had to pull the starter and replace the solenoid i was trig to be careful but im guessing i moved or breathed on one of the fuel lines and now its seeping line in front of it seems okay and lower section seems good I want to section it but not sure on the diameter of hi-pressure line i will...
  11. B

    NEED HELP no rear wiper no rear latch release

    that sounds like the motor pump is getting power so ground should be goo d
  12. B

    NEED HELP no rear wiper no rear latch release

    Okay so your gonna think this is weird .. I was also gettin a code for clutch fan.. After checking everything grounds etc etc in the mean time i reassembled the year latch assembly and put it in. no click nothing still The battery went low so good time to clean the terminals clear the code ...
  13. B

    NEED HELP no rear wiper no rear latch release

    no everything with the fob is fine locks etc on rest of the vehicle , theres a constant feed to the wiper motor , i tested with a volt meter and ground seems fine on the actuator and the wiper motor
  14. B

    NEED HELP no rear wiper no rear latch release

    05 ive tested for grounds and they appear good rear lic plate lights work fine checked in the one loom ( top of hatch )no breaks in wires .Im getting power to the wiper motor and the actuator but nothing works . Click inside actuator is very faint ive ran a good known ground to each component...

Online statistics

Members online
1
Guests online
76
Total visitors
77

Members online

No members online now.

Forum statistics

Threads
20,530
Messages
596,645
Unanswered questions
2
Answered questions
2
Members
13,671
Latest member
aczlan
Top Bottom