Search results

  1. DonnyDrywall

    FOR SALE TrailBlazer LED tail lights, wether tech, K&N cold air intake, AC Delco Motor Mounts, Free Shipping

    gosh, I sure would like to sell some of these things.... My prices are just starting points.....
  2. DonnyDrywall

    In need of 4.2

    I got $1000 on the trade in. I ended up with a 2014 cruze LT with 30000 miles. I needed something good on gas.
  3. DonnyDrywall

    FOR SALE TrailBlazer LED tail lights, wether tech, K&N cold air intake, AC Delco Motor Mounts, Free Shipping

    Well, My 07 Trailblazer LS blew up and I had to trade her in.... No responses so now FREE SHIPPING to continental US !!!!!!!!!!!!!!!!MAKE AN OFFER!!!!!!!!!!!!!!!!! First are these LED tail lights $100 Next are The WeatherTech floormats front and rear with a husky liner cargo, I'll shine...
  4. DonnyDrywall

    In need of 4.2

    thanks anyway guys, I traded it in. she spun a bearing. check out the forsale section. i'm selling led tail lights, k&n cold air intake, WeatherTech mats...
  5. DonnyDrywall

    In need of 4.2

    Well, a very faint knock got really loud this morning. It's there at idle but not very consistent through the rpm's. Rev it up and it's there through around 2 grand then it's less noticeable but let off and it disappears until it returns to idle. I'm pretty sure it's a rod bearing but a...
  6. DonnyDrywall

    Put my TrailBlazer in gear but won't move

    Every time I've had this issue (91 Firebird, 88 GMC C1500, 01 Silverado, 96 Jimmy) Its been the Transmission Pump. Most recently it was in the C1500. I backed out of my driveway, shift into drive and about 200 ft down the road it "let go". From that point all it would do in any gear is very...
  7. DonnyDrywall

    Upgrades for 07 Bose system

    I'm pretty happy with my upgraded bose setup. I left the bose amp in place using the PAC-0S-2C-BOSE interface with my Pumpkin Android double din Headunit. Kicker DS65 in the back doors, Kicker 11ds35 in the dash, and Dayton DA175-8 7" subwoofers in the front doors. I also added two 12 inch...
  8. DonnyDrywall

    05 Colorado brake lights stuck on with headlights

    Oh man, I forgot about this post. We fixed it that day, it ended up being the trailer wiring harness was in horrible shape with some very shotty repairs. I removed the harness and all is good.
  9. DonnyDrywall

    05 Colorado brake lights stuck on with headlights

    yep, front running lights come on when the brake lights. we will be inspecting the harness and adding extra grounds to the tail lights. thanks alot man.
  10. DonnyDrywall

    05 Colorado brake lights stuck on with headlights

    brake lights stuck on with parking and headlights
  11. DonnyDrywall

    05 Colorado brake lights stuck on with headlights

    Okay, So my buddy just bought an 05 colorado and like the title says, all three brake lights come on and stay on when the headlights are turned on. When the headlights are off the brake lights work normally. Could this be a faulty brake light switch?
  12. DonnyDrywall

    Powdercoated Rims

    thanks guys, therealsethallen, you should look up a color called silver vain, I almost used this color but i could not figure out a way to make the caps match. my shop has done a few sets of rims this color for a corvette and a cadillac and it looks great. heres the color
  13. DonnyDrywall

    Powdercoated Rims

    yeah we have a powdercoat primer that gets a half bake process where its coated with grey primer then baked to where the parts reach 350 degrees which is maintained for 5 mins then its pulled from the oven and cooled. after that color is applied in this case gloss black it's re-baked to where...
  14. DonnyDrywall

    Powdercoated Rims

    The center caps are liquid painted with that krylon MAXX it took pretty good with a little prep. we also have a vinyl cutter so i cut bowties for the caps. and yes I powdercoat everything i can, antenna, wipper arms, control arms pretty much everything i take off for any job gets cleaned and...
  15. DonnyDrywall

    Powdercoated Rims

    So one of my rims had a crack causing me to add air everyday. I found a set of stock rims on craigslist for 200 bucks. I brought them to work and sand blasted and powdercoated them. I like the end result, what do you guys think?
  16. DonnyDrywall

    Vaping.

    These are my rigs The Box mod is a iTaste MVP 3.0 30 watt with a kangertech subtank mini and its what I started with, if you dont count the cheap disposable ecigs(which I dont). The mechanical mod is a Hades clone with a dark horse RDA clone on top of it. It has the big 26650 battery and I...
  17. DonnyDrywall

    WeatherTech rear cargo area mat

    This is a not so great pic of the Husky Liner rear cargo. if your interested.
  18. DonnyDrywall

    Driverside Trailblazer Taillight and LED Tail Light SET

    there like 150 new, and like i said the passenger side stop light is spotty. Id say like 80-90 bucks shipped. I'm pretty sure its a cold solder joint on the board. these are sealed and i planed on cracking these open and fixing it but i lost intresest as I just got married, bought a house, and...
  19. DonnyDrywall

    Driverside Trailblazer Taillight and LED Tail Light SET

    this is a better picture of the led tail light set i have
  20. DonnyDrywall

    Driverside Trailblazer Taillight and LED Tail Light SET

    I have a clean(but dusty) Driverside taillight 25 bucks 5 dollars to help cover shipping make an offer I also have a SET of LED tail lights. The passenger brake light is spotty. sometimes it worked sometimes it didnt so I bought a replacment set. If there is any intrest in these pm or...
  21. DonnyDrywall

    cree vs hid

    I havent ran HIDs but a couple co-workers have and they seem to be happy with them. I LOVE my cree headlights. I havent had a driver fail and I'm approaching a year with them. I have had to exchange out both my low beams at separate times. when one failed i just put the high beam in its place...
  22. DonnyDrywall

    Metal flap in fuel filler neck

    I cant say for certain that there was a metal flap in there, but I really think there was. It's on 07 so the TSB leads me to believe there was no flap. I guess I'll try a different gas station in a few days and see what happens.
  23. DonnyDrywall

    Metal flap in fuel filler neck

    Okay, so this morning as I'm filling the truck up after about 20 bucks the gas pump clicks and shuts off like its full. I know its not, so I pull the handle and lock it again and instantly shuts down again. I pulled the nozzle out and I'm pretty sure that I had a metal flap, and that its gone...
  24. DonnyDrywall

    My 1958 Duratech S148 Boat Project

    Thanks guys, this runabout is 14 foot and rated for a 35 hp it currently has a 1972 25 hp Evinrude and tops out at 22 mph. the motor runs great since I rebuilt the carb. literately touch the key and she fires up. Also my dog Willow does enjoy that spot, but at the same time I built that up so I...
  25. DonnyDrywall

    My 1958 Duratech S148 Boat Project

    The boats been done for a couple weeks now so I thought I'd throw a couple pics up.
  26. DonnyDrywall

    My 1958 Duratech S148 Boat Project

    thats funny, on another side note. Up in Clare Michigan at my cottage there is a tiny little pontoon boat with Manitou on the side of it, on the little lake we have access to. and ever since we noticed it there the running joke is "how many people do you think that boat holds?" and the answer is...
  27. DonnyDrywall

    My 1958 Duratech S148 Boat Project

    actually I sold our pontoon because we are moving off the lake and we wanted a boat on a trailer. either way the pontoon is an 87 24 foot Manitu(sp) with a 45hp mariner. a co worker bought it because he just closed on his lake house and he is getting ready to wheel it inside. (it has been...
  28. DonnyDrywall

    My 1958 Duratech S148 Boat Project

    Thanks for the comments. and yeah that's why i jumped all over this boat. The retro styling really appealed to me. also its built like a tank, all original rivets are still holding with zero leaks. they don't build them like this anymore.

Online statistics

Members online
10
Guests online
904
Total visitors
914

Staff online

Forum statistics

Threads
20,059
Messages
588,965
Unanswered questions
1
Answered questions
2
Members
12,910
Latest member
mweiher
Top Bottom