Search results

  1. Yeagamyster04

    New wheels and tires!

    It did but I was able to get it close with hp tuners.
  2. Yeagamyster04

    2004 Sierra 2500 6.0 no comm with scanner

    My brother in law had same problem turned out being blown fuse. Replaced fuse under hood and worked after that. Give that a look
  3. Yeagamyster04

    New wheels and tires!

    They did, lowered 3 inches in rear and 1.5 up front. No rubbing at full turn
  4. Yeagamyster04

    New wheels and tires!

    Was purchased from a friend who bought for his silverado... paid 350 for them. Falcon pro g5 csv
  5. Yeagamyster04

    New wheels and tires!

    New shoes for the tb, small offset so little wider. Couldn't b happier, still rides smooth. Excited for summer, gonna be my daily driver.
  6. Yeagamyster04

    5.3 swap again.....

    And btw it's an 05.... don't know why I was set on it being 04. Seen no fuel filter, went in and checked title lol. I said we'll guess the 05 pinout works on 04
  7. Yeagamyster04

    5.3 swap again.....

    Well I went for my first real ride today, two 30 minute hauls. I'm very impressed with the power and drivability. No issues besides running very lean, got started tuning on it. Need better brakes now lol. Still need to run new fuel line and figure out why the truck locking its doors by itself...
  8. Yeagamyster04

    5.3 swap again.....

    Well I guess I was mistaken about fuel level in truck... put 5 gallons from the mower can in and showed almost quarter tank. Sorry for the confusion. Got the crossmember in so I can fab bracket off it. Should b super simple. I'll post pics after. Done swapping wires around so I'll b cleaning...
  9. Yeagamyster04

    5.3 swap again.....

    My buddy 2013 that we swapped 6.2 into. Truck is a monster. BTW I tune myself and am always willing to help out where I can.
  10. Yeagamyster04

    5.3 swap again.....

    I use hp tuners for scanner but have elms327 as well. Shows voltage back there just not on dash. Maybe it is on empty lol. Swore I filled it up before I parked it. Dash shows e with low fuel light on. Built a few motors in my day but this one feels different, throttle response is amazing and...
  11. Yeagamyster04

    5.3 swap again.....

    I have computer from rainier in and swapped fuse box from under hood as well. Been slowly moving pins from c1 i6 harness to p59 computer. Was hoping to find out why fuel gauge not working. Got all other gauges working, well not sure about speed because haven't driven yet. Pinout Showed level...
  12. Yeagamyster04

    5.3 swap again.....

    Was hoping for this one.
  13. Yeagamyster04

    5.3 swap again.....

    Very dirty but not worried about cleaning till I get everything the way I want it. Got the truck for 300 long story but needed 2 coils. Replaced them and rainier came about for 500. Was rolled but in great shape. Sold i6 for 300 so I have a total of 500 into this project. Still lots to do but...
  14. Yeagamyster04

    5.3 swap again.....

    I did get the rear end as well and got that swapped out. The donor was a totaled 04 buick rainier. Wasn't aware about front sway bar. As far as suspension new shocks and lowering springs in rear 3 inches, front has new everything besides actual strut, lowering springs 1.5 inches. Wheel bearings...
  15. Yeagamyster04

    5.3 swap again.....

    First start, using hp tuners to monitor things.
  16. Yeagamyster04

    5.3 swap again.....

    Went thru engine replaced all bearings and did some upgrades while I was there. Texas speed truck cam, 706 heads with port job, new oil pump, ls7 lifters, and more can't think of at the moment. Motors in and running great.
  17. Yeagamyster04

    5.3 swap again.....

    Been a long time coming, anyone help out with harness identification? The bigger one next to fuse box with locking lever in it. Maybe the name and pinout. It's a 04 tb 4x4 4.2.
  18. Yeagamyster04

    4.2l to 6.0l Envoy

    How's it coming with the swap? I've been watching hoping for updates 😆. I'm currently doing a swap myself and was going to make first post with lots of questions..

Members Online