Search results

  1. xavierny25

    What came in your mail today?

    Siding and a dumpster. Contractor will be here today to replace the windows we didn't get done previously first and siding starts Monday.
  2. xavierny25

    ANNOUNCEMENT Hoping for a happy 2022 to all

    Platinum looks good on me. Lol thanks @Jman423 Covid kicked me and the wifes ass for the better part of last week but we are still going.. Have a happy new year everyone!
  3. xavierny25

    'Quick-swapping' audio components between vehicles

    Fancy and elegant. This is just for my subs, I can have it in or out in just a few minutes. Door speakers are powered by a separate amp tucked in the cubby.
  4. xavierny25

    What did you do to your GMT today? [Part II]

    I appreciate the info and its inline with what I've read up on a short while ago and is probably the cheapest fix too. Everyone I talk to is surprised I was able to get done in under 10hrs but I did and have Ring door bell video to prove it 😆. Getting to the o2's isn't bad at all actually...
  5. xavierny25

    What did you do to your GMT today? [Part II]

    Just want to tag this onto my previous post. My oem cat at just shy of 230k miles, if you ask me thats pretty plugged up. After a few days of enjoying all the work I did and to see and fell the power difference and flow of my new complete exhaust. Gas mileage even went up from the 14-15mpg I...
  6. xavierny25

    What did you do to your GMT today? [Part II]

    Success! Although I did have to run out and grab a down stream o2 sensor. Got it all buttoned up before 7pm started at 10-10:30 this morning.
  7. xavierny25

    What did you do to your GMT today? [Part II]

    Wish me well guy! Here's what I'm about to start doing once the Voy rolls into the driveway. Hopefully I can knock it all out before it get to dark out.
  8. xavierny25

    What came in your mail today?

    New cat to complete a full exhaust replacement with the other parts from my previous post.
  9. xavierny25

    No Lighter Socket Power

    IIRC there's also a set of fuses under the back seat. My center console stopped work months ago last weekend I traced it to the actual connector in the rear coming undone some how.
  10. xavierny25

    What is the device on the B-pillar

    It's the interior temp sensor. For removal you'll need to move the driver seat as close to the steering wheel as possible then pull or pry the top of the lower trim(no need to remove it completely jus open it up). Lastly pry pull the upper b pillar trim from the bottom and that should give you...
  11. xavierny25

    What came in your mail today?

    Detroit axle exhaust manifold & bolts, walker muffler & resonator. Waiting on the cat and the powering steering pump that has developed a leak.
  12. xavierny25

    New 24's on 2004 Trailblazer

    Sorry to disappoint but my calipers aren't red and neither is any part of the suspension. This is my wife's daily and we both decided to go this route and do something different , cancer awareness pink powder coat.
  13. xavierny25

    What came in your mail today?

    Swimming pool cover pump.
  14. xavierny25

    New 24's on 2004 Trailblazer

    Mines is the lowered level envoy the SS is my brother-in-law's at stock height and wheels. Any reason you haven't painted your D pillar white or vinyl wrapped?
  15. xavierny25

    New 24's on 2004 Trailblazer

    I've got the same set up. I also have the spohn pan hard bar and rear control arms. How's the rear wheels centered in the wheel well with out adjustable rear control arms?
  16. xavierny25

    New 24's on 2004 Trailblazer

    @X831X what suspension set up you got on there? Truck and wheel set up are 👌.
  17. xavierny25

    Back from a long vacation

    Might of been, not sure do to glare in the shot.
  18. xavierny25

    Back from a long vacation

    @Mooseman is right thats me and I DON'T sell them I just ask for a small donation to the site and I'll gladly send you a set. I'll have to check my stock but I believe I still have quite a few.
  19. xavierny25

    What did you do to your GMT today? [Part II]

    Finally had a moment today to have a look at what oil the catch can has collected over the last 1yr (maybe year and a half can't remember to be honest) Little oil coming through at the bottom sight glass fitting. Then this..... Definitely oil but it almost made me want to do an oil change. I...
  20. xavierny25

    Word Association Game II

    Ray
  21. xavierny25

    What are you doing today? [Part II]

    Happy Thanksgiving! I'm really thankful for the community here, all the help I've gotten to keep my Envoy running like a top and all the friends I've made over the years. With that said from my family to yours a big thank you to you all! Enjoy and stay safe
  22. xavierny25

    Word Association Game II

    Gambling
  23. xavierny25

    What did you do to your GMT today? [Part II]

    What did u do now paul? Replaced the rusted out power steering cooler on the brother-in-law's TBSS. Then I watched as he cleaned up the mess.
  24. xavierny25

    What are you doing today? [Part II]

    Dyno mat is also an option but then everything would have to be pulled out and it really does put some added weight on the truck.
  25. xavierny25

    Word Association Game II

    Pole
  26. xavierny25

    What are you doing today? [Part II]

    The wife and I also did for while but I've driven a few and can't stand the road noise inside the cabin. I guess because of the unibody construction, even the wife asked why does it sound like this at 40k and our 225k mile envoy is so silent down the road.
  27. xavierny25

    Word Association Game II

    Cap
  28. xavierny25

    What are you doing today? [Part II]

    Morimoto hids and relay kit on my work supervisors 2016 Dodge Durango. A bit of a rant but... the truck comes with projectors from the factory why would they put halogen bulbs that are no brighter then the fog lights in. My guess is so that I can make money installing hid and led kits in them. Lol
  29. xavierny25

    NEED HELP Recommended Exhaust Manifold Replacement?

    Lol, I think they all crack in about the same spot. Dorman is definitely the way to go. I'd grab and replace the manifold bolts while your at it. BTW nice rig!
  30. xavierny25

    NEED HELP Recommended Exhaust Manifold Replacement?

    Dorman FTW on this part anyway. I'm on my third exhaust manifold, first was of course the original 2nd was some crappie of the shelf unit that I had a shop put in while I was out of town and the wife had the truck. Needless to say it didn't last long maybe about 2yrs. I installed a dorman and...

Members Online