MRRSM's latest activity

  • MRRSM
    MRRSM reacted to c good's post in the thread Uneven brake pad wear with Like Like.
    I had uneven wear because my caliper pistons were hanging up. Yours are only 1 year old but they may have contamination settling in...
  • MRRSM
    MRRSM reacted to Mooseman's post in the thread Uneven brake pad wear with Like Like.
    And also recheck the guide pins as they are usually pretty stingy with the grease. I add more to new calipers.
  • MRRSM
    MRRSM replied to the thread Uneven brake pad wear.
    There are a lot of misconceptions about precisely where to apply the Silicone Brake Grease whenever performing Brake Jobs. Eric "O" from...
  • MRRSM
    MRRSM reacted to flyboy2610's post in the thread P0506 code with Love Love.
    The wife's '06 TB with the 4.2L I6 engine has been giving her a check engine light (or the 'money light' as Eric O. from South Main Auto...
  • MRRSM
    MRRSM replied to the thread NEED HELP Head lights went out.
    Probable Culprit? Solid State Relay. Check out this Video from around 2:40 onward. This entire Video is a decent Primer on this Problem...
    • HEADLIGHTDIAGRAM.gif
  • MRRSM
    MRRSM reacted to christo829's post in the thread WANTED Prop Rod Support with Like Like.
    fleaBay has a possibility: https://www.ebay.com/itm/253439288737 Dorman makes a "Help" pack with a bunch of various ones as well, but...
  • MRRSM
    MRRSM reacted to christo829's post in the thread WANTED Prop Rod Support with Like Like.
    Ah...understood. I think Mooseman had the same impression I did, and his suggestion is going to be the most likely source anyway, but...
  • MRRSM
    MRRSM reacted to TJBaker57's post in the thread WANTED Prop Rod Support with Like Like.
    Sent out just now. Would've sent it yesterday but I awoke to having no water in the house! Had to deal with the well system yesterday.
  • MRRSM
    MRRSM reacted to brianlibby791's post in the thread 2000 GMC Sierra C3500 Build with Like Like.
    Here is a teeny bit of what ive done so far (really all ive gotten to do at least) frame is in great shape besides that one section...
  • MRRSM
    MRRSM reacted to brianlibby791's post in the thread 2000 GMC Sierra C3500 Build with Like Like.
    Good evening all. Its been awhile, i say almost two years i think since ive been terribly active. Figured id give an small update on the...
  • MRRSM
    MRRSM replied to the thread How to repair a broken seat..
    (1) Visit THIS Link to get the Basics of MIG Welder Settings. Remember this… MIG Welding with NON-SHIELD GAS using Flux-Core Welding...
  • MRRSM
    For CAD Designers and 3D Modelers with an interest in GM Products: https://grabcad.com/library/chevrolet_silverado-1...
  • MRRSM
    This is well researched technical paper on GM's Variable Valve Timing Strategies. There always seems to be more to learn about this...
  • MRRSM
    MRRSM reacted to gmcman's post in the thread Any good places to get replacement carpet? with Like Like.
    Thanks for the tips. I did find a couple vendors, one I believe is the same @MRRSM linked...
  • MRRSM
    MRRSM reacted to TJBaker57's post in the thread WANTED Prop Rod Support with Like Like.
    @Oldsnut I was at the yard today scrounging and saw this. Remembered someone had asked about one so I tossed it in with my loot. Still...
  • MRRSM
    MRRSM reacted to Chickenhawk's post in the thread WANTED Prop Rod Support with Love Love.
    I replaced my prop rod with hood struts many years ago. Still working fine after all these years...
  • MRRSM
    MRRSM reacted to TJBaker57's post in the thread NJ Inspection with Like Like.
    Vacuum slosh I believe is related to the measurement of the fuel tank pressure which is a negative in relation to atmospheric pressure...
  • MRRSM
    MRRSM reacted to JerryIrons's post in the thread NJ Inspection with Like Like.
    There is a GM procedure to follow to get past the emissions test as well: General Motors Driving Cycle A complete driving cycle...
  • MRRSM
    MRRSM reacted to littleblazer's post in the thread NJ Inspection with Like Like.
    Glad to have helped. :tiphat: Oddly enough I tried guaranteed to pass or whatever else bottled stuff was around or on sale at the auto...
  • MRRSM
    MRRSM reacted to NJTB's post in the thread NJ Inspection with Like Like.
    Went to inspection yesterday and passed. Thank you for all the suggestions everyone. Over the weekend I decided to play with the Tech 2...
  • MRRSM
    MRRSM reacted to TJBaker57's post in the thread NJ Inspection with Like Like.
    Here is a typical set of prerequisite conditions for leak checking DTCs.. The test won't even run until all these conditions are met...
  • MRRSM
    MRRSM reacted to gmcman's post in the thread What came in your mail today? with Like Like.
    Been waiting awhile for this....wasn't going to do the all night camp out. Not the Ultra, but this will work.
  • MRRSM
    MRRSM reacted to TollKeeper's post in the thread Body part name and availability ? with Like Like.
    Sail Panel is what I seem to remember it being called. Cant find anything with that name. D-Pillar panel does come up with options...
  • MRRSM
    MRRSM reacted to Blckshdw's post in the thread What came in your mail today? with Like Like.
    Not very exciting, but a string trimmer head adapter showed up a day early. Was able to get my replacement head installed nice and easy...
  • MRRSM
    MRRSM replied to the thread What came in your mail today?.
    This Item came today courtesy an Extremely Generous Offer from @hockeyman as a BNIB (Brand New In Box) ACDelco-Delphi Radio-CD meant for...
    • 2003ENVOYRADIOCD1.jpg
    • 2003ENVOYRADIOCD2.jpg
    • 2003ENVOYRADIOCD3.jpg
    • 2003ENVOYRADIOCD4.jpg
    • 2003ENVOYRADIOCD5.jpg
    • 2003ENVOYRADIOCD6.jpg
Top Bottom