budwich's latest activity

not sure but I think the system relies somewhat on knowing somewhat about atmospheric pressures which I think come "by" the MAP...

you could be helped by getting some real time data at the start of the exercise and then again once things get "smooth". My initial...

also check the oil.

you have to pull the negative cable back to the motor. The replacement is a cable with the module.

since it appears that you have some sort of access to the starter connections, then you should do some electrical measurements at those...

You should check and / or replace the flex hose running from the solid line to the caliper. On other vehicles, I have seen issue with...

yes but... if the turn switch causes things to happen between bright and "normal" (ie. stalk position), then it follows that a...

I guess one question is: why the turn signal switch? maybe that's related to your issue with the lights??

your upstream has "improved" (ie. better) but the downstream looks "funny". Of course, I don't believe the downstream has any impact...

:-) that is probably is his problem... broken connections and not the motor.

Possibly incorrect torque of the hub nut (too tight) causing a slight compression force which during the bearing heat / cool cycle may...

Any leaks at the exhaust manifold? You could check for vacuum leaks using carb cleaner, especially at the intake manifold. But as...

the first O2 voltage graph does not look right although it could be the time scale that makes that way. The "normal" graph should be a...

"KS" = Knock Sensor

glad you got further and have a working vehicle. Hopefully, it won't come back to haunt you again. Looking further at the C2, the...

what does the last part actually mean... NS,NG you need to describe what you are seeing at that point in terms of dash indicators...

I am not sure I understand "I did not command the fan here in any way". OK, so what was the current level asked for by the system...

Torque Lite does not permit the addition of custom PIDs. At first look it appears to but in practice I have found it would not work...

I think we aren't talking the same "words" ... I was questioning this statement that you made at the end of your post... "If so, the...

Perhaps I don't understand the EV clutch but I don't think it controls the speed of the fan "directly". It controls how much...

I guess every one is out 4wheelin in the new snow... :smile: did it ever work? how did you get to this state of "disrepair"... history...

what??? it is so rich that your cylinders are "awash" with gas... equivalent to a "flooded, no start condition". Not overly...

you might want to ensure that they identify to you the specific fuse... why.... because it will likely happen again and you will have a...

don't buy any more... do the "free test" that suggested... graph your ltft and the absolute vacuum and see if anything shows correlation.

ok thanks... :-( still ugly. I see the ltft has a "plateau" of about -10ish which seems like some richness that the system is trying...