6716
Hobbyist
Latest activity Postings About
-
-
Just cut and splice it in to get a connector that isn't damaged and corroded. -
6716 replied to the thread Blower doesn't blow.Today I replaced the connector. 18 months ago when I replaced the motor and resistor pack, things worked well enough. Then last summer...
-
-
Is this the same as your connector? https://www.rockauto.com/en/moreinfo.php?pk=9762904&cc=1431278&jsn=1584
-
I posted this video with regards to a Terrain - but this will still show how (one of the types!) of an AC pump works.
-
6716 replied to the thread What did you do to your GMT today? [Part II].Wired the brake controller connector in, still need to mount the unit.
-
6716 reacted to $ Khalid ! 9130's post in the thread What did you do to your GMT today? [Part II] with
Like.
Another busy week. Started out with the codes that I scanned for my Trailblazer. Cleared the light and was gone for the most part of... -
I appreciate all your insight and help. I decided to put in a spacer. I made sure there was a slight gap between the spacer and...
-
6716 replied to the thread Removing bolts from lower control arm.Hmmm. The manuals I used are the ones @Mooseman provides on his website, and there is no mention of a spacer in those, at least for the...
-
6716 replied to the thread Removing bolts from lower control arm.Can you post a screen shot or pic of the manual? I don't remember any spacer when I took the old ones off, and I put everything back...
-
6716 reacted to Badkitty795's post in the thread Key points for 4l60E removal/installation on 4.2L GMT360's with Haha.
Well, actually I'm a lady, but I'll take the compliment just the same. 🤣
-
6716 replied to the thread Lower Control Arm bracket bolts will not budge.I did not experience difficulty there. Put a wrench on one end, air tool on the other, and go. Or use lots of leverage. For just the...
-
6716 replied to the thread Removing bolts from lower control arm.If you want to go all the way and also remove the control arm brackets, I had to put a 5-foot pipe on my breaker bar to get enough...
-
6716 replied to the thread Way better mileage on 85 octane (?).https://www.fueleconomy.gov/feg/bymodel/2005_Chevrolet_Trailblazer.shtml https://www.fueleconomy.gov/feg/octane.shtml Your experience...
-
6716 replied to the thread Strategies for a front diff leak.No worries. It's actually the outboard seal. I was wondering if it was leaking on the outside of the seal between the seal and the case...
-
6716 replied to the thread Strategies for a front diff leak.The dye leads to the outboard axle seal. And it leaks something fierce. Might also be the drain plug, but the seal leak flows over the...
-
6716 replied to the thread Strategies for a front diff leak.So, lil' pro tip here to start us out, if you are going to add the UV dye to the diff oil it is probably best if you don't spill it all...
-
Wifey was able to take a pic as it rolled into this
-
2002 Envoy
-
6716 replied to the thread Saab 9-7x 5.3i 32" Iceland.Welcome.
-
6716 replied to the thread Strategies for a front diff leak.@Mooseman the inner seal seems like a lot of work, so I hope that's not it :blinkhuh:. I think I might replace the gasket and teflon the...
-
So, the front diff leaks, I think it has for all the 15 years I've had it. It's been dry a couple of times, I'm sure. I don't think it...
-
6716 replied to the thread Gas gauge sending unit.Overpaying helps me believe I am getting a quality part :rotfl:
-
6716 replied to the thread What did you do to your GMT today? [Part II].Saved myself a bunch of time and money by taking the truck to a new shop today, and got reminded how easy it is to jump to conclusions...
-
6716 reacted to Mooseman's post in the thread HELP REAR MAIN STILL LEAKING AFTER BEING REPLACED with Like.
Are you sure that's where it's leaking from? Could also be from the tranny although you would have seen that when you dropped it to...
-
6716 replied to the thread Gas gauge sending unit.Honestly I took whatever was in stock at Napa.
-
-
Loading…
-
Loading…
