Sparky
Member
- Dec 4, 2011
- 12,927
New air filter for the truck, and combustion chamber cleaner. Local parts stores wanted $22 for the cheapo Fram, and $24-25 for the standard Wix. I got a Wix HD filter for $20 shipped online.
What came in your mail today?
- Thread starter Mounce
- Start date
xavierny25
Member
The final touch to the exterior light.
Well for now anyway its gonna get to cold out for a 2nd round at a more expensive and more extensive projector retrofit.
Well for now anyway its gonna get to cold out for a 2nd round at a more expensive and more extensive projector retrofit.
HARDTRAILZ
Moderator
- Nov 18, 2011
- 49,665
xavierny25
Member
northcreek
Member
xavierny25
Member
Speaking of bulbs...
3 pairs of 3157's with my new favorite 2835 chip.
3 pairs of 3157's with my new favorite 2835 chip.
northcreek
Member
HARDTRAILZ
Moderator
- Nov 18, 2011
- 49,665
tsmith1156
Member
Yesterday, fell asleep before I got around to posting it last night.
New oil pressure sensor
New oil pressure sensor
HARDTRAILZ
Moderator
- Nov 18, 2011
- 49,665
Daniel644
Member
- Feb 27, 2015
- 574
the last parts for a budget build PC, got a i3 6100, MSI ITX H110 mobo, 8GB Hyper X ram, 120 GB Hyper X SSD, Asus DVD drive and an EVGA B1 450 watt PSU, combined with the old Gateway tower that housed the computer that went bad and reused the 320GB HDD that was in the tower already for data storage. basically ALL NEW PC for 320 in parts, just reused the Case and HDD from the original gateway.
This is a build for a guy that works for the Framer that builds the houses we draw.
This is a build for a guy that works for the Framer that builds the houses we draw.
xavierny25
Member
Just for @northcreek since hey loves to hear about bulbs. 
New led high beam bulbs for the brother-in-laws tbss.
New led high beam bulbs for the brother-in-laws tbss.
northcreek
Member
And while we're at it, got these yesterday.
Blckshdw
Moderator
Maybe I should trade in my LED Whore title, for a Tool Whore title? Nah....- Cordless impact driver
- Impact bits
- 2 piece threaded funnel (for oil and transmission)
- Center Punch
- Wire Stripper
- Magnetic Impact Bit Holder
- Impact Driver Socket Adapters
- Scissor Lift Impact Adapter
- Ratcheting Crimp Tool with Interchangeable bits
Daniel644
Member
- Feb 27, 2015
- 574
HARDTRAILZ
Moderator
- Nov 18, 2011
- 49,665
Blckshdw
Moderator
On today's episode of How the Mod Bug Rolls...
- Transmission filter and gasket
- 24" Scissor Jack
- 50 blue LEDs with 3124 chips
northcreek
Member
Blckshdw
Moderator
ugh...and you were doing so good lately....then the 50...
Well, it's for 2 reasons. First, I put these in my steering wheel buttons, and they are WAY brighter than the 5mm LEDs I used everywhere else. Second, I've had hit or miss luck with the lifespan of the huge eBay batch of LEDs.
So hopefully now I'll get better longevity as well as having everything match.
Blckshdw
Moderator
Something like 120 ft lbs, here's the link if you wanna compare.
https://www.amazon.com/dp/B01L8O0CL8/?tag=gmtnation-20
Blckshdw
Moderator
Tru-Cool tranny cooler (model 4454) Thanks to @RedEnvoyDenali for the recommendation. The built in thermal bypass sold me.
Eric04
Member
littleblazer
Member
- Jul 6, 2014
- 9,265
I'd say 4 quarts of auto trak II but they're more than a quart each... so 4 liters or 135.2 fl Oz. 
xavierny25
Member
A bunch of my cyber sale items I've purchased aswell as a bunch of gifts me and the wife have ordered. It's hard to keep track.
djthumper
Administrator
HARDTRAILZ
Moderator
- Nov 18, 2011
- 49,665
Got my Pizzazz cooker out for delivery. Been using one to cook all kinds of stuff in my buddys barm when we are having beers, so i thought it could work in my cabin and at home.
Blckshdw
Moderator
HARDTRAILZ
Moderator
- Nov 18, 2011
- 49,665
Daniel644
Member
- Feb 27, 2015
- 574
second biggest, second most expensive delivery I've had, new Gas Range and Dishwasher (washer/dryer combo being the most expensive).
while I was at it I went ahead and actually really started the remodel by pulling down the drop ceiling last night, look at all that ceiling height I can get, bottom of the floor joists is at 10'-9" above slab, plan is to border the outer 30"s at about 18" down from the bottom of the joists (this will give a place to route the duct work and existing plumbing) then in the middle set the height up to 6" below the floor joists so I can custom build removable panels that will allow access to plumbing and other utilities when needed.
while I was at it I went ahead and actually really started the remodel by pulling down the drop ceiling last night, look at all that ceiling height I can get, bottom of the floor joists is at 10'-9" above slab, plan is to border the outer 30"s at about 18" down from the bottom of the joists (this will give a place to route the duct work and existing plumbing) then in the middle set the height up to 6" below the floor joists so I can custom build removable panels that will allow access to plumbing and other utilities when needed.
Attachments
Harbor Freight aluminum jack. Old jack had paid for itself and started malfunctioning. And I was tired of its 60-70 pound weight, hence aluminum. This one is light enough to be comfortably one handed if it wasn't so awkward.
1.5 tons is more than I'll need for home gamer use.
Wheel off the ground with a few more inches of travel to go.
1.5 tons is more than I'll need for home gamer use.
Wheel off the ground with a few more inches of travel to go.
HARDTRAILZ
Moderator
- Nov 18, 2011
- 49,665
xavierny25
Member
HARDTRAILZ
Moderator
- Nov 18, 2011
- 49,665
northcreek
Member
What did NOT come in the mail today was the new latch for my center console. Now I will continue to be tortured by that spring loaded cover that's flapping around like a Croc's jaw.
Would have been here today but, with all the fruitcakes being sent around.....
Would have been here today but, with all the fruitcakes being sent around.....