NEED HELP Aftermarket radio and factory DVD
- Thread starter Dada
- Start date
http://www.pac-audio.com/productDetails.aspx?ProductId=1170
This is what i have. It will retain every function of the factory system except for switching sources from the rear controls. If you want to play one source up front and DVD in the rear, at the same time, then make sure you get head unit that supports dual zone.
This is what i have. It will retain every function of the factory system except for switching sources from the rear controls. If you want to play one source up front and DVD in the rear, at the same time, then make sure you get head unit that supports dual zone.
Snailblazin'
Member
- Dec 9, 2011
- 164
Sorry to jack this but...recently bought a new head unit and wanting to keep RSE and SWC would require me to install the RP5-GM11 from PAC, yes? My questions are thus: What specifically was done to retain RSE? What and where did you plug stuff in? Any pics?
Just hook the module up behind the radio. Nothing special except good wire management has to be done so it all fits.
FearlessAZ
Member
It's all about finding the right harness for the connection behind the radio. If you have a question about which harness is right, head to Crutchfield and fill out your vehicle info. It will tell you which harness you need. Then find it on Amazon for the best price. From there, it is like DON said, cable wiring and management.